Kabe Combi Mat


Kåbe Kombi Kabe Combi Mat Kabe Combi Mat Kabe Combi Mat

Rollable scraper mat consisting of aluminium profiles

Rollable heel proof and durable scraper mat consisting of aluminium profiles.

The mat is available in three alternatives: Kabe Combi Brush, Kabe Combi Textile and Kabe Combi Rubber.

The alternatives can be combined in one mat. The underside of the aluminium profiles is equipped with rubber strips in order to keep the mat steady on the surface and to decrease step sounds. Suitable for indoor use.




The mat is available in three alternatives


Kabe Combi Brush

Kabe Combi Textile

Kabe Combi Rubber

Materials and construction

Natural anodised aluminium alloy, EN AW-6063-T6. Also available in black or gold anodised design. Stainless steel wire Ø 2.3 mm, jointing.

Bristle-fused strips, bristles symmetrically distributed in dense groups that are fused to the plastic strip. The bristle lists are kept in place by rubber end stops. Damaged bristle strips can be replaced easily. Available in black, grey and red.

Black ribbed rubber strip.

Standard approx. 24 mm. Also available in the heights 12 and 18 mm.

Profile clearance:

Standard distance between profiles, max. 4 mm.

Made to measurements up to a maximum of 2000 x 1500 mm (AxB) in one piece. Larger areas are divided into proper sizes. Shaped mats can be manufactured according to customer specifications.

Approx 16 kg/m².

Declared in Byggvarubedömningen (Green Building Material Assessment), Sunda Hus.

Complies with the requirements in EN16005:2012 Kabe Original has a smooth surface and no unevenness. The mats follow the underlying surface and the mats are laid with millimetre alignment, edge to edge.

Brochures



Install Kabe Combi Mat as follows:

Generally speaking, all types of mat should always be laid on a level, solid surface.

In a mat well edged with a casting frame Kabe 12R, Kabe 20R or Kabe 22R.

Always give measurements A = width and B = length with specifications and when ordering..


On existing floor
with incline or step

ZoomIn

If the mat lies on an incline or steps, it is best to insert studs in the floor or steps to prevent the mat from slipping.

On existing floor
- to prevent the risk of tripping

ZoomIn

Mats can be provided with Kabe Mat Ramp type 1 on the ends to prevent the risk of tripping.


On existing floor
- against doorsill or step

ZoomIn

If the mat lies against a doorsill or step, a Kabe Mat Ramp type 1 can be fitted to the front edge.

Recessed surface on existing floor
- mat ramp around the mat

ZoomIn

Kabe Mat Ramp type 2 on all four sides of the mat. The ramp is not attached to the mat and should be screwed to the floor if possible.


Recessed surface on existing floor
- against doorsill or step

ZoomIn

Kabe Mat Ramp type 2 can be placed on two or three sides if the mat lies against a doorsill or step. Ramps should be securely screwed to the floor.

In a mat well
- should be recessed 20 - 22 mm

ZoomIn

The mat should be recessed 20 - 22 mm. The Kabe casting frame is recommended to protect surrounding floor edges.


Existing mat well
- recess less than 20 mm

ZoomIn

If the recess is 15-19 mm deep, use Kabe Mat Original, height 18 mm. If a mat is placed in a well of less than 15 mm, fit Kabe special ramps at both ends.

Drainage in the mat well
- drain

ZoomIn

Kabe drains have an effective sand separator. With or without water trap.


Mats over drainage grids
- self-cleaning effect

ZoomIn

To achieve a self-cleaning effect, place the mat on a Kabe drainage grid in a deeper recess.


Maintain Kabe Combi Mat as follows:

Kabe Combi Brush Mat is designed to scrape off sand and dirt from the shoe soles in an effective way. Due to the design a large quantity of dirt can remain in the mat without being noticed.

Kabe Combi Brush Mat doesn't have to be lifted completely in order to clean up the dirt that has gathered in the mat. Just take a simple grip in the stainless steel wire with the Kabe Mat lifting hook and lift the mat about 15 cm. Then roll up the mat, that the sand and the dirt can be removed by a vacuum-cleaner or a broom and a shovel.

Long mats should be rolled up from both ends. Please, rotate the mat 180 deg. once per year in order to spread the wear and tear.


File library


Brochures


Films

Download the film about Kabe Mat Original, Kabe Mat Original Serrated, Kabe Mat Original Color, Kabe de Luxe, Kabe Eco, Kabe Combi Mat och Kabex Special Grid.
Number of order: 1

Links