Kabe Ramp Frame


Kabe Ramp Frame Kabe Ramp Frame Kabe Ramp Frame

Kabe Ramp Frame used for mats installed on top of the floor

Type 1

Kabe Ramp Frame type 1 is used for Kabe Mat Original installed on top of the floor. Primarily in entrances where it is impossible to arrange a mat well due to practical or economical reasons.

The function of the Kabe Ramp Frame type 1 is to avoid tripping on the mat and to protect the edges of the mat. Kabe Ramp Frame type 1 can only be mounted on the front and/or back on the Kabe Mat Original.

Type 2

Kabe Ramp Frame type 2 is used for mats and scraper grids with a height 20-22 mm installed on top of the floor or on a level ground. Primarily in entrances where it is impossible to arrange a mat well due to practical or economical reasons. The function of the Kabe Ramp frame type 2 is to avoid tripping on the mat, to protect the edges of the mat and to keep the collected dirt in the mat.

Kabe Ramp Frame type 2 can be installed directly on the floor with 1, 2 ,3 or 4 sides depending on the conditions. Kabe Ramp Frame type 2 is equipped with rubber strips underneath to prevent dirt and water from leaking and to keep it steady on the floor.

The Ramp Frame can be fixed on the floor. Any kind of mat or scraper grid with a height 20-22 mm can be used in the Ramp Frame.



Materials and construction

Aluminium alloy EN AW 6063-T6.

Stainless steel SS 2343.

Type 1: 0,48 kg/m.
Type 2: 0,61 kg/m.

Made to measurements in the same width as Kabe Mat Original.

Aluminium-, gold- or black anodized.

Brochures



Ramp Frame type 1

Ramp Frame type 1
Ramp Frame type 1

Ramp Frame type 2

Ramp Frame type 2

Measure Ramp Frame

Measure Ramp Frame

Install Kabe Ramp Frame as follows:

Type 1: The Kabe Ramp Frame type 1 is supplied mounted on the Kabe Mat Original from our factory. Just roll out the mat and the installation is ready.

Type 2: Kabe Ramp Frame is supplied in loose lengths made to measurements with 45° corners. Insert the connectors in the profile as shown on the sketch and tap gently with a rubber hammer if needed.

Brochures



Mattramp typ 1

Ramp Frame type 1
Ramp Frame type 1

Mattramp typ 2

Ramp Frame type 2

Maintain Kabe Ramp Frame as follows:

Kabe Ramp Frame doesn't require any special care.

Images per page:


Show Hide filter

Now showing:


File library


Brochures


Links