Kabe Mat Original Serrated

Kabe Mat Original Serrated Kabe Mat Original Serrated Kabe Mat Original Serrated Kabe Mat Original Serrated

6 years full guaranteeA mat with an edge

Rollable scraper mats with natural coloured, light metal bars and replaceable strips in special black serrated rubber.

Now we have taken a further step forward in improving effectiveness by introducing Kabe Mat Original Serrated. This is the same as Kabe Mat Original apart from the fact that the rubber strips are serrated, which improves dirt removal and reduces the risk of slipping. In addition, as the mat is double sided, drainage is improved by the serrations on the reverse side.

Kabe Mats has provided SP Materials and construction Research Institute of Sweden with mats to test and compare for scraping effect. They found that the serrated mat had a 13.4 % better scraping effect than the non serrated mat. (See test report in the menu on the right).

Kabe Mat Original Serrated is reversible and should be turned over once a year to even out the wear.

The design of the serration pattern on Kabe Mat Original Serrated is protected.

Strengthening for tough conditions and inclined floors

If the mat is going to be exposed to excessive loads such as shopping trolleys, use the strengthened variant of Kabe Mat Original. Strengthened mats should also be used with inclined floors in combination with studs in the floor.

We guarantee that the mat will withstand shopping trolleys weighing up to 200 kg.

Kabe Mat Original Serrated is fully recyclable. Simply send worn out mats to us for recycling (See Contacts).
A detailed description of the contents can be downloaded via Contents declaration on the right.

Flexible entrances

Provide aesthetic freedom with maintained functionality. Kabe Mat Original Serrated can be used indoors or out and can be produced with straight or rounded edges in any form, as requested.

Simply send a sketch or template, and we will produce to suit.

Surface treatment alternatives

Natural aluminium is standard but can also be provided in black or gold anodized aluminium
(NOTE! The photos show a Kabe Mat Original, which is not serrated).

Natural aluminium

Gold anodized

Black anodized

Tactile indicators

Now you can create guide paths in our Kabe Mat Original. Our tactile indicators are easy to install to create guide paths that help the blind and vision impaired to orientate themselves.

Contact us and we will help you.

Tactile indicators for Kabe Mat Original
Tactile indicators for Kabe Mat Original

Materials and construction

Aluminium alloy EN AW-6005-A-T6.
Dimensions: 12 x 4.5 mm.

A composition that is especially resistant to extreme temperature variation, EPDM 70° Shore.
Dimensions 22 x 3.7 mm.

U 18 x 18 x 2 mm.

Standard 22 mm.

Kabe Mat Original Serrated is produced made to measure. Max. size of a single piece 2000 x 5000 (A x B). To cover larger areas, the mat is divided into suitably sized sections. We can produce mats of almost any shape. Simply provide us with a drawing or template.

The rubber strips and aluminium bars are riveted together with special rivets. The mat is held together by Ø 2.3 mm stainless steel wire.

Approx 12 kg/m².

Natural aluminium is standard on Kabe Mat Original Serrated but can also be provided in black or gold anodized aluminium.

Shopping trolley strengthening, tactile indicators.


A = Width | B = Length

‌Install Kabe Mat Original as follows:

Generally speaking, all types of mat should always be laid on a level, solid surface.

In a mat well edged with a casting frame Kabe 20R, Kabe 22R or otherwise on the floor in Kabe Ramp Frame type 2.

Always give measurements A = width and B = length with specifications and when ordering.

On existing floor
with incline or step


If the mat lies on an incline or steps, it is best to insert studs in the floor or steps to prevent the mat from slipping.

On existing floor
- to prevent the risk of tripping


Mats can be provided with Kabe Mat Ramp type 1 on the ends to prevent the risk of tripping.

On existing floor
- against doorsill or step


If the mat lies against a doorsill or step, a Kabe Mat Ramp type 1 can be fitted to the front edge.

Recessed surface on existing floor
- mat ramp around the mat


Kabe Mat Ramp type 2 on all four sides of the mat. The ramp is not attached to the mat and should be screwed to the floor if possible.

Recessed surface on existing floor
- against doorsill or step


Kabe Mat Ramp type 2 can be placed on two or three sides if the mat lies against a doorsill or step. Ramps should be securely screwed to the floor.

In a mat well
- should be recessed 20 - 22 mm


The mat should be recessed 20 - 22 mm. The Kabe casting frame is recommended to protect surrounding floor edges.

Existing mat well
- recess less than 20 mm


If the recess is 15-19 mm deep, use Kabe Mat Original, height 18 mm. If a mat is placed in a well of less than 15 mm, fit Kabe special ramps at both ends.

Drainage in the mat well
- drain


Kabe drains have an effective sand separator. With or without water trap.

Mats over drainage grids
- self-cleaning effect


To achieve a self-cleaning effect, place the mat on a Kabe drainage grid in a deeper recess.

‌Maintain Kabe Mat Original as follows:

Kabe Mat Original is designed to remove sand and dirt from shoe soles as effectively as possible. It is also designed so that a large amount of sand or grit can lie in the mat without the mat appearing dirty.

Cleaning regularity, naturally, depends completely on the individual circumstances.

In much used entrances during the winter months with snow, grit, salt etc, the mat must be cleaned more often since excessive sand can become compacted and lift the mat out of the ramps or frame. This causes the mat to wear in an unnatural way.

No heavy lifting with Kabe Mat Original.

Kabe Mat Original need not be lifted out to remove sand and grit. Hook a steel wire with the lifting hook and fold up about 15 cm of matting. Then simply roll up the mat and remove the sand and grit with a vacuum cleaner of brush. Roll long mats half way from each end.

Kabe Mat Original = The double sided door mat!

The mat is designed with identical surfaces and should be reversed at least once a year, for maximum service life.


A strip may occasionally move slightly out of place when the mat is rolled up. This should then be pushed back into place immediately to prevent it being damaged. Deformed or broken strips can be repaired or replaced at our factory in Fjugesta.

NOTE! Do not use chemicals to clean the mat, only water.

Maintenance Instructions

File library


Maintenance Instructions


Download the film about Kabe Mat Original, Kabe Mat Original Serrated, Kabe Mat Original Color, Kabe de Luxe, Kabe Eco, Kabe Combi Mat och Kabex Special Grid.
Number of order: 1